Tag: STEM

Cartesian Diver

Leave a comment

Cartesian Diver (7).JPG

I had no idea until after Travis and I made this little project that this is a classic experiment dating back to… the 1600s! It’s so-named because it was first described in detail by Rene Descartes, and it’s a neat way to show kids some basic principles of pressure and density.

First, we made our little diver – and by little, I mean little! Measure a 1 inch x 1.5 inch rectangle on aluminum foil (we folded our foil double so it was a little thicker and sturdier).

Draw a little diver shape onto this rectangle and cut out.

Cartesian Diver (1)

Travis thought he was so cute!

Cartesian Diver (2)

Cut 1.5 inches from a bendy straw. Bend into an upside-down U and attach to your diver with a small paper clip. Be sure to use a small one! Our first was big and so heavy our diver sank right down.

Cartesian Diver (3)

Now add a tiny bit of clay to his feet. Test that he doesn’t sink in a glass of water before you use a bottle; if so, just remove some clay.

Cartesian Diver (4)

If he’s horizontal, you need a little more clay. We made the mistake of skipping this step on our first try, although Travis thought it was hilarious to fish our diver out from the bottle once we realized he was sinking.

Cartesian Diver (5)

Once we had the proper diver who floated just right, we filled an empty 2 liter bottle with water nearly to the top. Screw the cap on tightly.

Squeeze the bottle and watch him go up and down! He’ll sink when his straw fills with water, increasing the density just enough, then float when you release the bottle and the water drains out of the straw again.

Cartesian Diver (6)

Ours wasn’t as perfect as some example we saw online, but we had fun!

Cartesian Diver (8)

Magnetic Fishing Game

Leave a comment

Magnetic Fish (9)

Travis and I played a game like this quite some time ago, but with a focus on numbers and letters more than the fish. Today, we just needed some silly fishy fun, and it turned out to be an interesting lesson in magnetism, too!

First, I cut out a fish template. Travis helped trace these onto construction paper and cut out.

Magnetic Fish (1)

Instead of hammering home preschool skills with letters and numbers this time, I invited him to draw on the fish. Silly smiles and scales soon turned into him being a fish doctor.

Magnetic Fish (3)

Oh no, some fish had polka dot flu! Or squiggle-itis!

Magnetic Fish (6)

For the fishing rods, tie yarn around one end of a dowel, and secure with masking tape. I tied a small magnet onto the other end of the yarn.

Magnetic Fish (5)

We set up our fish in the ocean, and raced to rescue them as fish doctors. I loved that he came up with this imaginative element to the game all on his own.

Magnetic Fish (7)

When he tried to rescue more than one fish at a time, he was disappointed the second one fell off from the small magnets we were using.

Magnetic Fish (10)

Hmm, would one of the bigger magnets we had around the house rescue more fish faster? Whoa, look how many we could pick up with this magnet!

Magnetic Fish (11)

Pretty soon, we were testing relative magnet strength in all kinds of ways, so all-in-all I’d say this was a great activity to help pass a rainy morning!

Baking Soda Ocean Art

Leave a comment

Baking Soda Ocean Art (17).JPG

Travis and I made a batch of a neat baking soda dough today! Originally we hoped to craft a few ocean creatures and corals. It turns out Travis also just had a blast playing with the dough in his own way while I did more of the actual sculpting, but that means it was a win-win all around.

To make the dough, combine 1 cup baking soda, 1/2 cup cornstarch, and 3/4 cup water in a bowl. Travis loves whenever we make “potions” like this.

Baking Soda Ocean Art (2)

Microwave for 1 minute, then stir. Microwave for a second minute and then stir; you’ll notice it is starting to thicken around the edges.

Continue to microwave at 20 second intervals thereafter, until the mixture is thick and creamy like mashed potatoes. Travis was the button presser for this part, as you can see! We needed about 3 or 4 intervals.

Baking Soda Ocean Art (3)

Cover the bowl with a damp paper towel, and let cool.

Baking Soda Ocean Art (4)

(Note: if your child is antsy during this waiting period, put leftover baking soda to good use with a classic volcano).

I tested the dough to make sure it had cooled completely, and found it to be quite sticky. I sprinkled in additional baking soda, and needed quite a lot; I wasn’t measuring, but probably close to 1/4 cup. If your dough is also sticky, add a little baking soda at a time and knead in after each addition. If you find you have the opposite problem (a dough that is too stiff), add a little extra water.

Travis loved the way it felt!

Baking Soda Ocean Art (5)

At first he wanted to know how to make sea creatures, especially the starfish: Form 5 teardrop shapes, and attach them together.

Baking Soda Ocean Art (6)

Some extra dots of dough give the starfish bumpy texture.

Baking Soda Ocean Art (8)

Coral was also fun; form a round ball, then add marks with a pencil for texture.

Baking Soda Ocean Art (9)

From there, Travis had his own game going, happily getting his hands into the dough over and over again.

Baking Soda Ocean Art (12)

I rounded out our ocean collection with a few more sea creatures. For a sand dollar, roll a ball and then flatten. Draw a flower shape in the center with the tip of a pencil, and add a few holes around the edges.

Tube sponges were the neatest to make: Roll a few log shapes, then attach together, and punch a hole in the center of each with a pencil.

Baking Soda Ocean Art (14)

Finally, we rolled up a few cute sea snails.

Baking Soda Ocean Art (16)

Travis really wanted to play with these right away, which you can do if you bake at 175 degrees F for about 45 minutes. But when he learned that this would mean the dough turning brown, he – maturely! – decided he could wait the day or so you’ll need for the dough to dry completely.

Baking Soda Ocean Art (13)

Definitely worth the wait.

Baking Soda Ocean Art (15)

 

Comb Waterbending

Leave a comment

Comb Bend (5)

Hive mind! Travis and I need your help with this one. We set out to do some science, which unfortunately didn’t work. The idea is to use polarity to make water bend, using nothing more than a comb, a ruler, and some freshly-shampooed hair. But our water stayed straight – rats! So will this work for you?

First, we turned the faucet on to just a thin stream, and placed a ruler across the sink for an accurate test – the water hit right about the 6 inch mark.

Comb Bend (2)

We held the comb up to the water, to ensure we were starting with no bend to the water stream.

Comb Bend (3)

Travis was fresh from the bath, so we ran the comb through his just-washed hair to generate static. These negative particles should then attract the positive particles in the water, which kids will be familiar with if they understand magnets and “opposites attract.”

Comb Bend (1)

Online testers of this experiment seemed to have no trouble, saying the comb bent the water stream as much as 3 inches! But we saw no movement.

Did his hair need to be dry? We waited for it to air-dry, then tested again. Still no movement.

Comb Bend (4)

Knowing that it was static we were after, we then tried running the comb through a blanket right out of the dryer – one that was full of static! And still our water didn’t bend.

Comb Bend (6)

So, posting this game here for my readers in the hopes that someone else has better luck. If so, what worked? Can you figure out why? We’re eager to make the water bend next time!

Liquid Hourglass

Leave a comment

Liquid Hourglass (9).JPG

Are you passing the hours during a snow day, or the latest winter storm, or just having a day that’s too cold to venture outside? Then this hourglass project is for you! It will make watching the passing hours into a fantastically cool experiment.

To start, you need two identical bottles (we used empty water bottles that were 1 liter).

Liquid Hourglass (1)

Hot glue the caps together, pressing for a tight seal.

Liquid Hourglass (2)

Next add a piece of duct tape, to make a water-tight seal.

Liquid Hourglass (3)

Mark two dots where you will insert straws, then (grown-up step!) drill through the holes.

Liquid Hourglass (4)

Cut straws into pieces that are 2-inches long. Insert one straw 1/3 of the way into one of the holes. Insert the other straw 1/3 of the way in the other direction.

Liquid Hourglass (5)

Fill your first bottle with vegetable oil. Definitely use the cheap stuff here, folks, since the bottle needs to be filled completely. We used a funnel to avoid any mess.

Liquid Hourglass (6)

Fill the second bottle with water. We added blue food coloring for visual effect.

Liquid Hourglass (7)

Now screw one half of the bottle cap onto the bottle with oil. Quickly and carefully, flip over and screw onto the bottle with water. Immediately you’ll get a big bubbling result as the two liquids start to mix.

Liquid Hourglass (8)

After a few minutes, the bubbles will settle down and you can really see what’s happening. Because the oil is less dense than water, it will bubble up, bit by bit through the straw, at the same time that the water bubbles down.

Liquid Hourglass (13)

First, we were simply in awe of how cool this looked.

Liquid Hourglass (10)

Then we decided to get more scientific: Had we really created an hourglass? We timed it and discovered it took 45 minutes on the dot before we had one completely blue bottle, and one completely oil bottle.

Liquid Hourglass (16)

And then there’s the fact that this is simply mesmerizing to watch. Seriously, I could have meditated in front of these bubbles.

Liquid Hourglass (14)

And Travis’s glee made it apparent he felt the same.

Liquid Hourglass (15)

Although not necessary, you can decorate your bottles, too. Since the blue and yellow effect reminded us of sand and water, we added a little octopus and his cave…

Liquid Hourglass (11)

…and these fishy friends.

Liquid Hourglass (12)

What a way to watch the hours pass!

 

Paper Cup Drums

Leave a comment

Paper Cup Drums (8).JPG

A kitchen band never gets old; everyone loves clanging on pots, tapping together spoons, and banging on old pans, from toddlers to big kids. But sometimes I don’t want to clean out all the pots after the kids have played with them… and that’s where these clever paper cup drums come in, this month’s craft from High Five magazine. Travis got to use kitchen items for his instruments and I had no pots to wash – a win-win! You’ll also get to teach a little science, thanks to the different tones the drums make.

Paper Cup Drums (1)

First, set out 2 large paper cups and 2 small ones. Cut one large cup and one small cup in half, leaving the others whole – great scissor practice!

Paper Cup Drums (2)

Travis decorated the cups next, using marker on the outside and then coloring inside them, too, which I wouldn’t have thought of!

Paper Cup Drums (4)

We glued down our drums as a “drum set” on a piece of cardboard, then waited for the glue to set.

Paper Cup Drums (3)

Once dry, it was time to play! Use a spoon to tap on the “drums” – first we just enjoyed the sounds.

Paper Cup Drums (5)

But to be more educational about it, I asked Travis what difference he noticed between the big cups and small ones. Tapping first one, then the other, he could hear the difference – a low tone, then a high tone.

Paper Cup Drums (6)

I challenged him to guess how the medium cups would compare. Lower or higher than the big? He initially guessed lower, but then amended his guess once we played the tone. Interestingly, your intact small cup and cut-in-half big cup should now be nearly the same size, and thus sound quite alike.

Paper Cup Drums (7)

Note: We originally tried using a metal spoon, but found that the difference in cup size/tones was much more apparent when tapping with a plastic spoon.

Paper Cup Drums alt.JPG

Thanks for the musical play, High Five!

 

Q-Tip Skeleton

Leave a comment

Qtip Skeleton (10).JPG

This little craft is great for kids who learning about the body and bones. Big kids can be really exact with it, mapping out locations for the humerus, femur, and more. For my four year old, it was fun just to talk about our bodies and bones, and help him see a skeleton take shape.

To set up the craft, I cut out a skull shape from white construction paper and glued it onto a piece of black paper.

Qtip Skeleton (1)

Next we needed to make bones! To do so, I cut q-tips into varying lengths, including a few that I left whole for bigger bones in the body. This is a fun step because q-tips are quite hard to snip through, which means they go flying when you cut them. Travis became the bone-gathering doctor!

Qtip Skeleton (2)

I asked if he wanted to decide where to place each bone, or preferred to have me lay down lines of glue for him to follow. He asked for the latter, but then it was a great game for him to match the length of my glue stripe to a properly sized “bone.”

Qtip Skeleton (4)

He loved doing the hand. “Look, it’s my pinkie finger!”

Qtip Skeleton (6)

This was a great chance to talk about the differences in the length of our bones. We needed to find a long one for the femur, I explained, which was the biggest bone in the body.

Qtip Skeleton (5)

It was also neat to touch our real, corresponding bones as we worked. He loved feeling his spine.

Qtip Skeleton (7)

When the skeleton looked almost done, I asked him what we still needed. “Hip bones!” he decided, touching his own, so we glued down a few more pieces.

Qtip Skeleton (8)

So proud of my little scientist putting this one together.

Qtip Skeleton (9)

Soda Teeth Experiment

Leave a comment

Soda Teeth (3).JPG

Need a way to discourage your kids from drinking dark, sugary sodas? If you’re having a hard time convincing them that it’s no good for their teeth, look no further than this science experiment.

If your children are old enough to have lost baby teeth, then that’s truly the best material for the activity; just make sure you play before the Tooth Fairy pays a visit, or they’ll be confused!

At only 4, Travis hasn’t lost any teeth, so we needed another material that would tarnish in soda like tooth enamel. The online suggestion was… eggs!

That means I need a little caveat before the post, because now it sounds very vegan-unfriendly. We also needed a can of Coke, and one of Sprite, two sodas we wouldn’t actually be drinking in our household anyway. But in the name of science, the sodas were purchased, and eggs were borrowed from my mother-in-law!

With that vegan caveat out of the way, it was time to be scientists. We filled one glass with Coke and another with Sprite.

sodateeth28229

Travis was very curious about the eggs, so we checked them out before adding one to each cup.

sodateeth28129

He loved seeing the way the sodas bubbled. “And that would hurt my teeth!” he surmised. He’s onto something…

sodateeth28629

Then it was just a matter of waiting. We set up a chart, with a column for each soda and a row for each day we’d observe. This was a nice chance for Travis to practice writing his numbers.

sodateeth28429

Every day, we used a big spoon to scoop out the eggs and observe. You can definitely break out the magnifying glass each day, too.

sodateeth28529

The first thing he noticed was that the bubbles faded by Day 1. The eggs, however, had changed very little.

sodateeth28729

By Day 2 we wondered: was the Coke egg a little darker?

Finally by Day 4 it was obvious; the coke had tarnished one egg. (Hopefully Travis’s take-away is not that he should drink lots of clear soda!).

sodateeth28829

I reminded him that what we saw in the egg was similar to what we’d see in a tooth. So avoid sodas to avoid discoloration and decay.

sodateeth281029

Overall, we liked the STEM aspect of this project, but I think it would have been clearer for him with real teeth. Perhaps we’ll have to do it again when he loses his first!

sodateeth28929

 

Make a Model Lung

Leave a comment

model lung (6)

This neat visual of how a lung and diaphragm work together can be made with just a few simple household items. It was a great dose of STEM learning on a stormy day cooped up inside.

You’ll need to start with a sturdy plastic bottle. At first I assumed larger was better, and tried a family-sized club soda bottle… but our balloon wouldn’t fit in the next step, so be aware! You really need a single-serving bottle (16 ounces), either of water or soda.

Carefully cut the bottle in half. This was definitely a grown-up step, and I cautioned Travis that the edge of the bottle was a bit jagged. Keep the top half; recycle the bottom of the bottle.

Tie a knot in an uninflated balloon, and snip off the top of it. Stretch that top over the end of the bottle, and secure with a rubber band.

model lung (1)

Your bottle might squash a bit, but that’s fine as long as no air can get in.

model lung (2)

Now slide a straw into a second balloon. Secure them together with a rubber band, making sure the balloon is attached, but not so tight that air can’t get in. Travis tested with a few huffs!

model lung (4)

Now push the balloon into the neck of the bottle, and use a little clay around the straw to hold it in place.

model lung (5)

Holding the bottle firmly, pull down on the bottom balloon. The balloon inside will inflate!

model lung (7)

Explain to kids that this movement replicates what happens when you breathe: when your diaphragm moves down with each breath in, it makes room for your lungs, which then fill with air.

Travis’s favorite part of the activity was trying to get the balloon to “hiccup”, which you can do by pulling the bottom balloon a few times quickly. The balloon in the bottle will jump, which is what happens when you get a case of the hics.

All in all, this was a great addendum to the fun we had with our My Body crate from Kiwi Co.

Baking Powder vs. Baking Soda

Leave a comment

baking powder (9)

Today Travis and I made potions!

The impetus for this little experiment came from Raddish Kid’s lesson plan attached to our Hot Cocoa Cupcakes. Kids can delve further into the world of leaveners and what makes baked goods rise. I knew some of the science was too advanced for Travis, but I culled out bits of the lesson that were appropriate to a preschooler.

baking powder (1)

First, I set out a dish of baking soda and baking powder, and invited Travis to explore them. We ran through the five senses: touch, taste, smell, sight, and sound. Could we hear the powders? We giggled at that, then moved on to the others.

baking powder (2)

He noticed that the baking soda was smoother and finer than the baking powder, although they felt similar. He declined the offer to taste, but in this case, it’s perfectly safe to do so!

A quick science lesson followed: baking soda is basically ground up rock, and it’s a base, which means it needs an acid to react.

Baking powder contains a base and two acids, and it will react in a recipe two times. Travis liked this idea, and that it means fluffier pancakes or cupcakes.

To start out experiment, I put out two test tubes of water. We added baking soda to one and baking powder to the other. Aha, only the baking powder reacted, so water was not an acid!

baking powder (3)

Now we tested each in four other liquids: vinegar, liquid soap, rubbing alcohol, and juice. The baking soda only reacted in the vinegar and juice – we found our two acids!

baking powder (5)

Baking powder, on the other hand, reacted in everything. That said, none of baking powder’s reactions were quite as spectacular as the classic baking soda/vinegar pairing.

baking powder (7)

Travis’s favorite? Baking soda in the vinegar of course; we had to do that a few times. The juice was quite fun too, bubbling up wildly to the top of the test tube.

baking powder (8)

In sum,this is a neat way for your kids to understand why baked goods are rising in the oven; you can really see that bubbling and rising action at work.

baking powder (6)

Another oldie but goodie? Show your kids that you can blow up a balloon with yeast! This is something Travis and I did when exploring the letter Y, back when he was only 2 years old, but it never grows old!