Month: December 2020

Snowman Craft from Tin Cans

Leave a comment

Snowman from Tin Cans (11)

Many years ago I tried to make a tin can wind chime with Travis that failed spectacularly because I didn’t have a proper way to string them together. This was an update on that idea for Veronika, with a winter snowman twist!

I set out three cleaned and dried cans on a tray, and told Veronika we needed to cover them with white paint. Even more fun, we used homemade puffy paint!

Snowman from Tin Cans (1)

I squirted a puddle of white glue onto our craft tray, then covered that with a layer of shaving cream. Mix it all up with a paint brush and start to paint the cans. Note: This is also a fantastic hack any time you need lots of white paint but don’t have much on hand.

Snowman from Tin Cans (2)

Veronika absolutely loved this paint and was quite serious about applying it to one of the cans while I worked on the other two.

Snowman from Tin Cans (8)

Once painted, we wanted to make them sparkly, so added some fake snowflake glitter. At this point I confess I questioned my sanity a little, because sticky puffy paint + fake snow sparkles = a spectacular mess. But she was having so much fun it was worth it!

Snowman from Tin Cans (5)

While I set the cans aside to dry, she kept playing with leftover snow sparkles, puffy paint, and a spare can on the tray for a while.

Snowman from Tin Cans (6)

I was pleasantly surprised with how fast the puffy paint dried. By the time she woke up from her nap, the cans were dry and it was time to turn them into a snowman.

Snowman from Tin Cans (4)

I used hot glue to add tidbits from our craft bin onto pieces of magnet tape. We used pom poms for eyes, black buttons for, well, buttons, and pipe cleaner pieces in red and orange for the mouth and carrot nose, respectively. You’ll need two magnets to make the red pipe cleaner piece curve into a smile.

Snowman from Tin Cans (7)

To attach the cans, I first made a hole in each with a hammer and nail. This isn’t difficult, but definitely a grown-up step.

Snowman from Tin Cans (9)

Next, I used a length of floral wire, inserting down through one can, then through a second, and then looping it so it wouldn’t come back up out of the hole. This was a touch tricky, so we decided to call it a win and have a two can snowman instead of a three can one.

Snowman from Tin Cans (10)

Now the magnet pieces will adhere right onto the tin cans, yes even through the puffy paint! As a final step, I twisted the top length of floral wire around our porch lamp outside so the tin snowman can dangle in the winter wind.

Snowman from Tin Cans (12)

Marshmallow Snowman Stamping

Leave a comment

Marshmallow Snowman Stampers (7)

If your toddler loves dot markers, then edible dot markers are even better! To wit, all you need to make this craft are large marshmallows. We love the vegan ones from Dandies.

Marshmallow Snowman Stampers (1)

I set out a plate of the marshmallows along with a dish of white paint and black construction paper. I showed Veronika how to dip one end of a marshmallow in the paint and then onto the paper. It made a perfect circle!

Marshmallow Snowman Stampers (2)

Indeed, this craft was all about circles. The marshmallows make little circle prints, and if you help your toddler slightly, you’ll end up with three circles for a snowman: small, medium, and large. I highly recommend having a few marshmallows on the side just for eating so you can avoid paint on little tongues. Veronika loved snacking while we crafted!

Marshmallow Snowman Stampers (5)

The craft was easiest for her if I stamped an outline of the snowman first, which she then could fill in with her marshmallow stamp.

Marshmallow Snowman Stampers (3)

Once the paint dried, I cut out a few features from construction paper to glue down, like top hats, carrot noses, and tree branch arms. Add any final details with marker.

Marshmallow Snowman Stampers (6)

Why did we paint our snowmen on a black background? Because we finished the day with a read of Snowmen at Night, a book about all the silly things snowmen might get up to after dark. Hot cocoa and snowball fights? Yes please!

Marshmallow Snowman Stampers (8)

Chick’n Enchiladas

Leave a comment

Chicken Enchiladas (3)

Enchiladas are a great family meal, but versions made with store-bought enchilada sauce can be too spicy for kids. Swap in mushroom gravy for the enchilada sauce and you’ll hear cries of “yum” instead of cries of pain.

Chicken Enchiladas (2)

Ingredients:

  • 1 tablespoon Earth Balance butter
  • 1/4 cup sliced green onions
  • 1 teaspoon minced garlic
  • 1 (8-ounce) box mushroom gravy
  • 1 cup vegan sour cream (such as Kite Hill)
  • 2 cups cooked and chopped Gardein chick’n strips
  • 2 chopped tomatoes
  • 1 cup black beans
  • 2 cups shredded vegan cheddar, divided
  • 6 whole-wheat tortillas
  1. To prepare the sauce, melt the butter in a large saucepan over medium heat. Add the green onion and garlic; cook for about 4 minutes, until softened.
  2. Stir in the gravy and sour cream, whisking to combine. Cook for a few minutes until heated through.
  3. Remove 3/4 cup gravy mixture from the pan and set aside. Add the cooked chick’n, tomatoes, black beans, and 1 cup cheddar to the remaining gravy mixture.
  4. Divide the chick’n mixture evenly among the 6 tortillas. Roll up and place, seam side down, in a 9×13-inch baking pan.
  5. Pour the reserved gravy mixture over the top and sprinkle with the remaining 1 cup cheddar. Bake at 350 degrees F for 30 minutes, until the cheese is melted.

Styrofoam Ornaments

Leave a comment

Styrofoam Ornaments (8)

Here’s a way to upcycle those Styrofoam trays that come home from the produce department now and then (I’m looking at you, mini cucumbers) and use them in a holiday craft. Today, Veronika and I turned them into ornaments!

Once the tray had been washed and dried, we pulled out a few Christmas cookie cutters and traced around them, then cut out. Veronika loved talking about all the shapes.

Styrofoam Ornaments (1)

Now use the tip of a white crayon to make imprinted designs in the Styrofoam. I showed Veronika an example of lines and dots on a stocking shape. Since it was hard for her to press down the crayon hard enough or with precision, I took directions from her instead. She asked for circles on the candy cane and triangles on the star!

Styrofoam Ornaments (2)

Next, we painted the shapes with acrylic paint. She was so excited when she noticed that the paint had made lines on her paintbrush, at one point.

Styrofoam Ornaments (3)

Finally, it was time to squirt on glitter glue. Aim to use a corresponding color of glitter for each color of paint you’ve used (although with a toddler, be prepared for some mixing and matching). Ideally, once you brush the glitter glue across the surface of the shapes with a paintbrush, it will sink into the etched lines you made with the white crayon.

Styrofoam Ornaments (5)

However, since I was doing this project with a toddler, ours didn’t come out quite that neatly. But Veronika loved simply squirting big globs of glitter glue, which was just fine.

Styrofoam Ornaments (6)

Punch a hole in the top once dry, thread with string, and hang from the tree!

Styrofoam Ornaments var

Cinnamon Drawings

Leave a comment

Cinnamon Drawings (8)

If there’s one scent that evokes Christmas in our home, than cinnamon is it. Here’s a fantastic sensory project that allows toddlers to take in one of the best smells of the season while making art!

To start, I cut out two simple Christmas-themed shapes from sandpaper. I had a coarse grade in green and a medium grade in brown, so it worked out nicely to draw a Christmas tree on the green and a simple gingerbread man on the brown.

Cinnamon Drawings (2)

Cut out your shapes and give to your toddler along with a few whole cinnamon sticks. Of course the first thing to do is take a nice big smell. “I smell with my nose!” Veronika is learning to say of her sense of smell.

Cinnamon Drawings (1)

Then I showed her that if she rubbed the cinnamon against the rough sandpaper, it left behind a trail of scented brown cinnamon.

Cinnamon Drawings (3)

Of course we had to smell the artwork again once it was covered!

Cinnamon Drawings (5)

Veronika loved both the shapes and the smell, but she was also very interested in transferring the cinnamon sticks in and out of their jar for a while. That meant this turned into a fine motor skills activity, too!

Cinnamon Drawings (4)

When the sandpaper was covered, I drew on a few final features with marker, then punched a hole and threaded ribbon through each so they could hang on our tree.

Cinnamon Drawings (7)

Felt Ornaments, 3 Ways

Leave a comment

Felt Lollipop (2)

Fancy store-bought ornaments are beautiful, but my favorite ones from over the years have been the homemade ones. All you need for these three options are sheets of felt from the craft store and a little glue!

Felt Lollipops:

For the first version, stack 4 colors of felt together and cut into 3/4-inch wide strips. Glue the layers together at one end with tacky glue, then begin rolling up, adding dots of glue periodically. The mechanics of this were a bit tricky for Travis, but he started to get the hang of it!

Felt Lollipop (4)

Glue the loose ends of each felt color down, then wrap with a rubber band to hold everything in place as the glue dries.

Felt Lollipop (6)

Once dry, glue a loop of string onto the back, along with a lollipop stick. I found that hot glue was better for this step than tacky glue. These looked delicious hanging from the tree!

Felt Lollipop (1)

Felt Garland:

For the garland, cut many two-inch pieces of felt and begin using hot glue to attach them in two long strands. We made one that was all purple, and one that alternated light and dark green. The purple felt was cut thinner, and in retrospect I would have done the green strip just as thin.

Felt Garland (2)

Place a heavy book on one end of the two stands, then begin winding them together, securing with a clothespin at intervals.

Felt Garland (3)

Once it looks the way you want, use hot glue at the ends and everywhere else you had a clothespin. String around the tree as a garland!

Felt Garland (5)

Felt Ribbon Candy:

For the final version, we cut three colors of felt into 1-inch wide strips. Glue them together with tacky glue, then start folding the strand over itself, accordion-style, adding a drop of glue after each fold. Add a rubber band to hold it together until the glue dries.

Felt Ribbon (2)

Now just add a string with one more drop of glue, and it’s ready to hang on the tree!

Felt Ribbon (3)

Which one do your kids enjoy making the most? Please share in the comments!

Felt Garland (6)

Gingerbread People

2 Comments

Gingerbread People (13)

Gingerbread cookies are the perfect baking project with a toddler. There’s messy dough to mix up, wonderful spices to smell, adorably-shaped cookie cutters, and little people to decorate. In sum, Veronika had lots of floury, sticky, sensory fun with this one!

Gingerbread People (1)

To start, we needed to make the dough. She loved smelling each spice before we added it into the dry ingredients!

Ingredients:

  • 1 tablespoon flaxseed
  • 3 tablespoons cold water
  • 1 cup shortening
  • 3/4 cup agave nectar
  • 1 cup molasses
  • 1 and 1/2 teaspoons baking soda
  • 1/2 teaspoon salt
  • 1 teaspoon ground ginger
  • 1 teaspoon ground cinnamon
  • 1 teaspoon ground cloves
  • 5 cups flour
  1. In a small bowl, whisk together the flaxseed and water; let stand for 5 minutes.
  2. In the bowl of a stand mixer, combine the shortening, agave, molasses, and flaxseed mixture; beat until combined.
  3. Combine the baking soda, salt, ginger, cinnamon, cloves, and flour in a large bowl. Add the dry ingredients to the wet ingredients and stir until combined. Wrap the dough in plastic wrap and chill for at least 1 hour.

Veronika loved watching the dough mix up in our stand mixer!

Gingerbread People (2)

And as you can see, she also loved taste-testing right from the bowl!

Gingerbread People (4)

She marveled at how sticky the dough was as we wrapped it in plastic to chill in the fridge.

Gingerbread People (3)

Once the dough had chilled, we rolled it out on a generously floured surface, then used gingerbread man cookie cutters to cut out our little people. I gave Veronika a plate filled with decorating goodies: raisins, almonds, licorice strips, and small jelly bean candies. It was up to her to decorate!

Gingerbread People (6)

She thought this was delightful! She loved giving the people eyes and a “skirt”.

Gingerbread People (7)

Since I knew her cookies risked getting broken or mashed, I worked alongside her to ensure we had enough people for a few real batches of cookies.

Gingerbread People (12)

Big brother Travis thought it looked so fun that he needed to join in the action!

Gingerbread People (8)

He was so proud of this very ornately-decorated fellow, with almond shoes and licorice shirt sleeves.

Gingerbread People (11)

Once the people have been fully adorned, bake at 375 degrees F for 10 minutes. And then comes the best part of all; it was time for a taste test!

Gingerbread People (9)

You might consider ending the day with a read of the classic Gingerbread Man tale.

No Mess Paper Plate Snowflakes

Leave a comment

No Mess Paper Plate Snowflakes (9)

Last week, Veronika painted snowflakes with q-tips, a great toddler method with very little mess. Today’s version meant even easier clean-up, since all the paint was inside a zip-top plastic bag!

To start, I cut out snowflakes from paper plates. I folded each plate in half, then in half again, and snipped out triangles, ovals, and heart shapes. Open back up to reveal the “snowflake” to your child.

No Mess Paper Plate Snowflakes (2)

In retrospect, I would have scalloped the edges, too, for a prettier result. Veronika sure thought this was neat, though, and loved sitting beside me with her own pair of safety scissors!

No Mess Paper Plate Snowflakes (1)

Place each plate in a large zip-top bag and add a little bit of silver and blue paint. You can also add a little glitter to each bag, but since we happened to have glitter paint, everything went in all at once! I sealed the bags and showed Veronika how to mush the paint around with her hands until the plate was painted.

No Mess Paper Plate Snowflakes (3)

She was so surprised when she first reached down and realized she could touch the paint but not get messy. And then she just really enjoyed it! I helped a little to spread the paint to the edges of the plates.

No Mess Paper Plate Snowflakes (5)

It took a little trial and error to figure out the right amount of paint to use. Too much and the plate was so saturated that it ripped upon removal from the bag. Too little and you won’t be able to spread the paint far enough. So my recommendation is to start with less than you think you need and work your way up.

No Mess Paper Plate Snowflakes (6)

Next time, I would use a little white paint, too, since the blue dominated over the silver. Still, they turned out pretty!

No Mess Paper Plate Snowflakes (7)

Let the plates dry completely, then hang the snowflakes around the house for a winter snowstorm.

Puppet Engineering Kiwi Crate

Leave a comment

Kiwi Puppets (4)

Puppets are the perfect STEAM-style blend of engineering (simple machines, gravity) and art (decoration), which means it was the perfect subject matter for Travis’s latest crate from Kiwi Co.

The crate featured two types of puppets, and first up was to Make a Marionette. Travis helped assemble the control bar by attaching two wooden sticks with a rubber band.

Kiwi Puppets (1)

The puppet’s body is a piece of cloth, and we threaded wood beads onto each corner through pipe cleaners. The pipe cleaners are then left at the top corners to become the strings for the arms. This was a wise choice on the part of Kiwi Crate, as there was no risk of strings tangling and frustrating your child! A final wooden bead and pipe cleaner go on for the head, and the pipe cleaners then loop onto the control bar.

Kiwi Puppets (2)

There are foam headpieces and stickers in the kit to make three different animals: a lion, a rabbit, and a bear. Travis chose the lion first. Roar!

Kiwi Puppets (5)

It was nice that these pieces are interchangeable so your little puppeteer can vary the plot of the story. Next up was Talking Puppets, which were completely different to put together. Travis first decorated two paper templates, the bird template with feather stickers and the crocodile template with scale stickers.

Kiwi Puppets (8)

We assembled the handles, which are made of three wooden frame pieces per puppet attached to a strip of paper with a brad. The middle piece slides up and down, allowing the puppet’s “mouth” to open and close. Travis added on his decorated bird and alligator bodies with the provided Velcro strips and then the puppets were ready to go!

Kiwi Puppets (9)

After all that, the puppets needed a stage, so it was time to make a quick Puppet Theater. Kiwi is great about suggesting ways to upcycle the crate itself, and that’s exactly what was going on here. Cut a rectangle from the lid of the crate (or a similarly-sized shoebox) with scissors. Poke the pointy end of a pencil into each side of the box and then tape the eraser end up into the top corners, so the box is now propped open.

Kiwi Puppets (14)

If your kids are feeling artsy, have them decorate the crate with markers or other craft supplies. I suggested we make a Puppet Theater marquee sign, but Travis skipped ahead into having the puppets put on a show.

Kiwi Puppets (16)

It was time for imagination to take over after all that scientific engineering!

Kiwi Puppets (15)

To finish the fun, Travis checked out this kit’s Explore booklet, including mazes, more about the science of how puppets move, and cultural facts about puppets from around the world.

Kiwi Puppets (12)

We also read Balloons over Broadway (all about the invention of the puppets in the Macy’s Thanksgiving Day parade), and 10-Minute Puppets by Noel MacNeal.

Kiwi Puppets alt

Winter Road

Leave a comment

Winter Road (1)

What do you do when the kids want to play in the snow but you only have a thin, icy layer that’s not great for making snowmen? Make a road, instead!

I did this the easiest way ever, not even a shovel required. Instead, I took a few old markers and drew the outline of a road directly onto the snow.

Winter Road (2)

Now all the kids had to do was drive along the track.

Winter Road (3)

We added a few cross streets and curves to our road, and even a little stop sign for an early lesson on road safety.

Winter Road (5)

I had mostly intended the track for Veronika, but it turned out that big brother Travis loved driving the cars, too.

Winter Road (6)

Construction vehicles were particularly fun, like our bulldozer and dump truck which could scoop up snow or be filled with it.

Winter Road (7)

The icy wind drove us indoors fairly quickly, but at least we got in a little creative snow play!

Winter Road (4)